Basic Info.
Theory
Electromagnetic Relay
Usage
Household Appliances Relay
Protective Characteristics
Sealed Relay
Action Principle
Electromagnetic Type
Type
Electric Parameter Relay
Specification
23mm*16.1mm*10.2mm
Product Description
,Basic characteristics- Coil specification
- Nominal voltage DC 5V
- Coil resistance 125Ω±10% (at 23±5ºC)
- Rated current DC 40mA±10% (at 23±5ºC)
- Operate voltage DC 3.75V Max ((at 23±5ºC)
- Release voltage DC 0.25V Min ((at 23±5ºC)
- Maximum voltage DC 6.5V(130% of nominal voltage)
- Coil temperature rise 50K Max (Coil:5V)
- Contact Specification
- Contact configuration SPST-NO (1 Form A)--()
- Contact rating 16A 250VAC; 16A 125VAC (Resistive load);
TV-5(tungsten- Contact resistance Initial() 100 mΩ Max (At DC6V 1A)
- Operate time 10ms Max
- Release time 5ms Max
- Maximum operating Mechanically 18000 cycle/h()
frequency Electrically 600 cycle/h()(7) Contact temperature rise 50K Max (16A)- General Specification
(1) Insulation resistance 1000MΩ Min (at DC500V)(2) Dielectric strengthbetween open contacts 1000VAC,50/60 HZ for 1Minutebetween contacts and coil 2500VAC,50/60 HZ for 1 Minute (3) Ambient temperature -40ºC~+85ºC(Not freezing and condensing at low temperature)(4) Relative Humidity 45% to 85% RH(5) Electrical life 100,000 Operations Min (at 16A 250VAC)(6) Mechanical life 10,000,000 operations Min- ,Quality System,Safety Certification and RoHS(REACH)
(1) UL certified 16A 250VAC; TV-5(2)TUV certified 16A 250VAC;16A 30VDC(3) CQC certified 16A 250VAC;(4) ISO9001:2008 certified File No. 05311Q22581R0S(5) RoHS and REACH CompliantEnvironmental Characteristics- Vibration resistance
1.1 Error operation At constant vibration of double amplitude 1.5mm, 10~55 HZ , in each direction of X,Y,Z for 5 minutes. No error operation more than 1 ms. - Endurance
No construction trouble when vibrate it from 3 directions for 2 hours.( Amplitude 1.5mm, 10~55 HZ)- Shock resistance
2.1 Error operation At peak acceleration 100m/s2, duration 11ms, 3 shocks is given in each direction of X, Y, Z. No error operation more than 1 ms.- Endurance
No construction trouble when shock it from 3 directions 3 times at peak acceleration 1000m/s2, duration 6ms.- Cold resistance
3.1 Cold resistanceNo any trouble on construction or characteristic when leave relay in -40ºC±2ºC for 240h. After that, leave it in standard condition for 2 hours.- Heat resistance
4.1 Heat resistanceNo any trouble on construction or characteristic when leave relay in +85ºC±2ºC for 240h. After that, leave it in standard condition for 2 hours.- Moisture resistance
After keeping relay for 240h in 40ºC, 90%, then leave it in standard condition for 2 hours.Insulation resistance 10MΩ Min. No any trouble on construction or characteristic.Terminal characteristics1,Terminal strength10N pushed into any terminals for 10 s. There shall be no abnormalities.(The curving of the terminals shall be acceptable)2,Terminal solderability In case of lead free solder 260±5ºC, 5±0.5 s , 90% of the dipped portion shall be soldered.3,Soldering thermalNo any trouble on construction or characteristic. When dipped into solder bath 260±5ºC, 10±1s.Standardard test condition1,Ambient temperature23±5ºC2,Relative humidity 25%~75%3,Air pressure86kPa~106kPa4,Direction of Test Terminals down position,Storage condition1,Ambient temperature-40ºC~+85ºC2,Relative humidity 35%~85%3,Environment3.1,.Store in locations where the product or container is not expose to corrosive gas such as hydrogen sulfide or salty air.3.2,.Store in locations where no visible dust exists.3.3,.Store in locations not subject to direct sunlight.Packing Information| P/N | Inner packing | Carton Dimensions | QTY(PCS)/carton | Net weight(Kg) | Gross weight(Kg) |
| L×W×H(cm) |
| YTA | 100pcs/box | 40.0 x 25 x 16.5 | 1000 | 10.0 | 11.5 |
- Product type: YTA
- Enclosure
SS---Flux-tight SH---Sealed case(Washable)- Contact Pole
1-1 pole- Coil Nominal Voltage
05-5VDC 12-12VDC 24-24VDC- Coil Nominal Power
D-Standard coil power- Contact arrangement
M-1 Form A - Special code(not necessary to be shown on product)
Numbers or letters, do not represent electrical changes, these codes denote customer's requirements.Reminds1,,.Any special requirements, please contact us
2.Under the Environment with dangerous gas such as H2S, SO2 or NO2, fully sealed type is recommended.3,If the ambience allows, flux proof type is preferentially recommended.4,If the user washes the PCB and relay in the ultrasonic cleaner, fully sealed type must be selected.
Address:
No2-202, Gaoli Forth Road, Jaoyitang Community, Tangxia Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, ISO 14000, QC 080000, BSCI, EICC
Company Introduction:
Our company offers variety of products which can meetyour multifarious demands. We adhere to the management principles of " Qualityfirst, customer first and credit-based" Since theestablishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate withenterprises from all over the world in order to realize a win-win situationsince the trend of economic globalization has developed with anirresistible force.
){kind=link}